Posted By |
Discussion Topic:
239 c.i.d. missing on 2 cyls.
-- page:
1
2
3
4
|
|
37RAGTOPMAN |
06-20-2010 @ 8:22 AM
|
|
|
Senior
Posts: 1942
Joined: Oct 2009
|
reds 34 that flywheel looks pretty nasty, I would try finding another, ask the machine shop what they think, advertise for one here on the want ads, KEEP ON TRUCKIN 37 RAGTOPMAN
|
supereal |
06-20-2010 @ 3:00 PM
|
|
|
Senior
Posts: 6819
Joined: Oct 2009
|
Your flywheel has a "checked" surface, likely from a slipping clutch. Usually they can be resurfaced if the flywheel itself is not cracked. If the cut is drastic, the portion holding the pressure plate bolts must also be cut a similar amount to preserve the ability of the clutch disc to be properly gripped. We have resurfaced many that look that bad. The broken chunk seems to be from the top of one side of a valve guide.
|
Reds34 |
06-20-2010 @ 6:26 PM
|
|
|
Member
Posts: 16
Joined: Jun 2010
|
I actually managed to find another flywheel so I will probably throw the old one in the scr*p pile, and get the one I found resurfaced. Red
|
ford38v8 |
06-20-2010 @ 9:22 PM
|
|
|
Senior
Posts: 2739
Joined: Oct 2009
|
Red, after resurfacing your flywheel, bolt up the clutch and have the whole assembly balanced.
Alan
|