| Posted By |
Discussion Topic:
1937 Ford Battery Hold - Down
-- page:
1
2
|
|
TonyM |
01-14-2018 @ 8:39 PM
|
|
|
|
Member
Posts: 464
Joined: Sep 2010
|
My car came with this battery hold-down piece. It does not match the descriptions in the club's 1937 book. Is it a Ford piece? If it is a Ford piece, was it used on 1937 Fords? Thanks.
. . . 78-730B
|
TonyM |
01-14-2018 @ 8:39 PM
|
|
|
|
Member
Posts: 464
Joined: Sep 2010
|
Is this a Ford Battery Hold-Down?
. . . 78-730B
|
TonyM |
01-14-2018 @ 8:40 PM
|
|
|
|
Member
Posts: 464
Joined: Sep 2010
|
Battery hold down
. . . 78-730B
|
nelsb01 |
01-14-2018 @ 9:03 PM
|
|
|
|
Senior
Posts: 1098
Joined: Oct 2009
|
TonyM; It looks like my battery hold down bracket in my 1949 -- except for the bolt on the one side. I agree, that it does not match the hold down shown in the 1937 Ford Book.
|
Chris.NZ |
01-15-2018 @ 12:34 AM
|
|
|
|
Member
Posts: 49
Joined: Oct 2009
|
That photo is of a 39 deluxe battery clamp PN 91A 5165. 37, 38 and 39 standard clamps are all pretty similar but are non-adjustable.
|
ford38v8 |
01-15-2018 @ 9:41 AM
|
|
|
|
Senior
Posts: 2883
Joined: Oct 2009
|
Tony, The hold down you picture is Ford, but is for a '39 DeLuxe. The '37, '38. and '39 Standard does not have the nut & bolt, but does have a vertical, down-turned ear, welded at the center of one long side. This ear has a threaded hole to accept a bolt through the firewall from inside the car. (Look at your firewall and dash insulation). This ear also has a folded down tab at the top, which extends over the top of the battery. There were three designs of the hold down clamp, all three slightly different, but having the above stated specs.
Alan
|
TonyM |
01-15-2018 @ 11:00 AM
|
|
|
|
Member
Posts: 464
Joined: Sep 2010
|
Thanks Everybody.
. . . 78-730B
|
supereal |
01-17-2018 @ 1:39 PM
|
|
|
|
Senior
Posts: 6819
Joined: Oct 2009
|
You can order the hold down at C&G 800/266-0470. The same [art was used 33-38. The part number is 40-4165-A, about $15
|
MG |
01-17-2018 @ 1:49 PM
|
|
|
|
Senior
Posts: 1301
Joined: Nov 2009
|
Part number for the '37 Hold-Down is 78-5165. This is what you need (picture) from Bob Drake > https://www.bobdrake.com/FordItem.aspx?Item=78-5165
|
TonyM |
01-17-2018 @ 7:39 PM
|
|
|
|
Member
Posts: 464
Joined: Sep 2010
|
Thanks.
. . . 78-730B
|