Posted By |
Discussion Topic:
36 Stromberg 97 still leaking
-- page:
1
2
|
|
DEAN333 |
09-16-2012 @ 6:27 AM
|
|
|
Member
Posts: 248
Joined: May 2012
|
Oh....when I first started diagnosing my die-out problem....I never found any gunk on the screen or in the fuel pump sediment bowl. No junk in the carb either other than normal wear and tear.
TIM CARLIG
|
TomO |
09-16-2012 @ 9:28 AM
|
|
|
Senior
Posts: 7243
Joined: Oct 2009
|
Tim, The easiest place to install a fuel filter is between the tank line and the fuel pump, replacing the flex line. That said, if you don't have a problem with junk in the tank, you probably don't need a fuel filter. Modern cars need them to prevent the small passages from being blocked. The fuel pump sediment bowl and screen will catch all the particles that could cause a problem.
Tom
|
supereal |
09-16-2012 @ 11:05 AM
|
|
|
Senior
Posts: 6819
Joined: Oct 2009
|
We install a generic inline fuel filter as close to the tank as possible, and before an inline electric pump, if you have one. While we prefer the Fram-type metal cased filter, to protect against road damage, the plastic ones work as well. You never know when a gas station has run their storage tank low and presented you with crud from the bottom. Most stations have to pay upon delivery of fuel, so at today's prices, that can be a lot of cash. They run storage down as far as possible. The screen and sediment bowl will catch some, but not as much as an inline filter. If your line from the tank to the carb is already rusty and dirty, it doesn't take much to create a stall. I carry a spare filter in my road kit.
|