Posted By |
Discussion Topic:
No-start?
-- page:
1
2
|
|
TomO |
01-25-2021 @ 8:58 AM
|
|
|
Senior
Posts: 7243
Joined: Oct 2009
|
Autolite 216 plugs are correct for your engine and should be gapped at .025" for best performance. I like to use Marvel Mystery Oil to free up stuck parts. It has a better varnish removing detergent that Kroil.
Tom
|
sarahcecelia |
01-26-2021 @ 3:40 PM
|
|
|
Senior
Posts: 1169
Joined: Mar 2013
|
Always use Champion H10s!They cost a little more, but they are worth it!!That's what Ford used "Back in the Day!" I used Autolites in my 1950 sedan once, and one wouldn't fire after very low mileage on it! I took it out- and it LOOKED LIKE NEW!! I think it went bad in the porcelain where the contact goes up through it!! I've never ever had a problem wth Champions like that! They are good until that center contact burns down to that center porcelain!! You just, take them out every 6 or 7,000 miles, file that center contact flat, gap them, and go!!
Regards, Steve Lee
|
Jeepbut |
02-01-2021 @ 6:46 PM
|
|
|
Member
Posts: 75
Joined: Jan 2017
|
Thanks TomO for the Marvel tip. I was going to ask how to free up sticky lifters.
|
51504bat |
02-02-2021 @ 7:00 AM
|
|
|
Member
Posts: 232
Joined: Apr 2020
|
The debate about what spark plug for a flathead is like that of the best oil. Everyone seems to have their own thoughts/favorites. I used to run Champion H10's in the 8ba with EAB heads and a Chevy distributor with no issues. I was surprised though when the H10's I purchased at my local independent parts house came individually packaged as lawnmower plugs. I did switch to Autolite 216's during my last tune up and the engine seems to run a tad bit better but I've got no data to back that up. Probably no real difference - just wishful thinking on my part.
______________ No signature
|