Posted By |
Discussion Topic:
What year engine do I have?
-- page:
1
2
|
|
CharlieStephens |
12-14-2011 @ 9:39 AM
|
|
|
Senior
Posts: 882
Joined: Oct 2009
|
Ellsworth, I am not sure if there was a question associated with your 12/14/11 post but your picture shows a 24 stud engine with the water pump located on the front of the block. The '32-'36 pumps were located in the cylinder head. Charlie Stephens
This message was edited by CharlieStephens on 12-14-11 @ 9:41 AM
|
ellsworth |
12-14-2011 @ 9:16 AM
|
|
|
Member
Posts: 13
Joined: Oct 2010
|
Hi Charlie, Will try to send another picture of the water pump location.
|
ellsworth |
12-14-2011 @ 9:10 AM
|
|
|
Member
Posts: 13
Joined: Oct 2010
|
Thanks for all of your information. Here is the result: 24 studs water pump low on the block distributor low on the block front flywheel casing # C71.1.1 (second dot in the middle) My guess is a 39 or there about. Can you tell me additional information concerning the flywheel casing #? Will try to attach a couple of pictures. Thanks again for all you input.
|
ford38v8 |
12-11-2011 @ 7:04 PM
|
|
|
Senior
Posts: 2739
Joined: Oct 2009
|
Ah, Charlie, that answers my question!
Alan
|
CharlieStephens |
12-11-2011 @ 5:03 PM
|
|
|
Senior
Posts: 882
Joined: Oct 2009
|
deleted duplicate post
This message was edited by CharlieStephens on 12-11-11 @ 6:48 PM
|
CharlieStephens |
12-11-2011 @ 4:54 PM
|
|
|
Senior
Posts: 882
Joined: Oct 2009
|
I am not sure what you mean about the petcocks. If it was my reference to them being vertical in '32 that was because the hole was drilled and tapped vertical in the block in '32 only. Charlie Stephens
|
CharlieStephens |
12-11-2011 @ 4:54 PM
|
|
|
Senior
Posts: 882
Joined: Oct 2009
|
I am not sure what you mean about the petcocks. If it was my reference to them being vertical in '32 that was because the hole was drilled and tapped vertical in the block in '32 only. Charlie Stephens
|
ford38v8 |
12-11-2011 @ 9:15 AM
|
|
|
Senior
Posts: 2739
Joined: Oct 2009
|
Charlie, as with heads that may have been replaced, isn't it true that petcocks may have been replaced? Both can be indicators, but bolt-ons can be decieving.
Alan
|
1934 Ford |
12-11-2011 @ 4:30 AM
|
|
|
Senior
Posts: 568
Joined: Oct 2009
|
Great write up Charlie! Other than 1932, don't all the 21 stud engines take the same replacement plug for the C-7 (Champion D-16 or Autolite 386) plug with a 18 thread? (Sold as lawn mower and equipment plugs at parts stores)
|
CharlieStephens |
12-08-2011 @ 4:01 PM
|
|
|
Senior
Posts: 882
Joined: Oct 2009
|
I can't answer the spark plug question. Could be right engine wrong heads, wrong engine with right heads for that engine. Picture will tell. Charlie Stephens
|