Post to the EFV-8 Forum
Post Classified Ads
Shop the Online Store

User Login

Not Registered Yet? Click Here to Sign Up!

Early Ford V-8 Club Forum

FORUM RULES: Users agree to these Rules when using Forum.

The site administrator reserves the right to change the terms and conditions of the user agreement without prior notice to the user. It is the responsibility of the user to regularly review the terms of this agreement.

The user agrees to the following terms:

All information that you provide to us for your membership is correct.
You will not use your membership to spam, harrass, or exploit other members in any way.
Vulgar, Abusive, Racist and Sexist Language will not be tolerated.
Commercial-type sales postings will not be allowed.
No mass posting or flooding of the boards is allowed.
No Advertising of parts or cars; no Ebay or business/commercial ads (please use the "Classified" for ads Wanted or For Sale).
VIEWING MULTIPLE TOPICS ON SCREEN: You can choose to see more than 10 Topics at a time ... Log In and choose "Preferences" from the top bar on the Forum page. Scroll down and Change the "Default Topics Returned" parameter to 25 or 50, and save the changes. Since this setting is stored in your browser 'cookies' (if enabled), it seems to use that stored value even if you are not logged in. So, if you use a PC that you haven't logged into the forum from, the setting still seem to remain at the default.
EXTERNAL PHOTO LINKS ON FORUM: You can still use external photo links in your posts on the new forum. They follow the rules of any link in that they have to have the URL link qualified down to the full image file name (example: .jpg). The links will open in a new browser window, the same as an uploaded image attached to a post. Since an image attachment to any post does not display inline with the post, the results are the same. You can use multiple external links within a post. This link is from photos on a site from Don Clink's 'Deuce@75' albums:

http://donclink.com/deuce_75_1/images/dscn2950.jpg

Using links from photo sites such as Photobucket can help in "size" issue with uploaded attachment files. For best viewing in web browsers, photos should be around the 800x600 pixel range, and probably not more than 1024x768. Most cameras today store HUGE jpg image files, as the default settings are in the 7, 8, 10, and 12Mb image sizes. The image files that are then attached are very large, and the browser can't display the full image size without using the scroll bars. Use the re-sizing functions of your photo editing software to reduce the image to 800x600, which reduces the file sixe and the image load time in the browser. Don uses Google's free Picassa3 software, which is an excellent photo management product. All of the photo albums of the Deuce, Grand National, and Auburn that are links on the NORG site were built using Picassa's web creation functions. And it's free? (THANKS to Don Clink for the info!)
HOW DO I SHOW MY EMAIL ADDRESS ALONG WITH MY USERNAME? You can LogIn on the Forum, and select PREFERENCES. On this page Members can add optional information such as their City,State, Country; Occupation; Hobbies: list a Homepage; list AOL Instant Messanger Handle; Signature; "Make Email Address viewable to others;" and even change the number of Default Topics shown on a page. WHEN others click on your profile, they will see this information.

EFV-8 Club Forum / General Ford Discussion / Shock removal

Reply to Discussion | New Discussion

<< previous || next >>

Posted By

Discussion Topic: Shock removal

51woodie

05-27-2022 @ 6:25 PM

reply profile send p.m.

Senior
Posts: 561
Joined: Jan 2017

Brad. Glad I could help.

bradshari@aol.com

05-27-2022 @ 6:10 AM

reply profile send p.m.

Member
Posts: 20
Joined: Sep 2021

Thank you everyone for your help. I bought the tool from Harbor Freight that 19 dollars that 51 Woodie suggested and it worked like a charm. Success thank to all of you!!

RAK402

05-25-2022 @ 8:59 AM

reply profile send p.m.

Member
Posts: 456
Joined: Jul 2015

I used tools similar to the one posted above by 51woodie to remove the shock links.

It worked GREAT!

This message was edited by RAK402 on 5-25-22 @ 9:00 AM

Robert/Texas

05-25-2022 @ 7:15 AM

reply profile send p.m.

New Member
Posts: 114
Joined: Dec 2009

When I had the rear shocks rebuilt by Bill Wzorek some years ago, he sent me a tool for removing the arms. This tool worked well for me and I returned it to him when I sent the shocks to him for rebuilding. You might check with his successor about the tool. Someone here may know how to contact him.

51woodie

05-24-2022 @ 6:42 AM

reply profile send p.m.

Senior
Posts: 561
Joined: Jan 2017

I'm not familiar with '37s, but if the shock links are like the ones on my '46 Coupe, the nut you see in the picture holds the shaft of the link into a tapered hole in the shock arm. Using the tool I showed in my previous post, the U end of the tool goes over the stud between the link and the shock arm, then place the jacking bolt over the end of the link stud and tighten till it pops free. If you plan to reuse the shock link put a nut flush on the end of the link stud to protect the threads. When I replaced the shock links on the rear of my '46, the link studs were in so tight, that I cranked the jacking bolt until it wouldn't turn any more, then I had to heat the end of the shock arm a bit with a torch until it broke free.

zeke3

05-23-2022 @ 6:56 PM

reply profile send p.m.

New Member
Posts: 101
Joined: Apr 2011

The shock link is what connects the lever of the shock to the axle. The two studs on the shock link are a taper fit, similar to a tie rod end. The tool that 51 woodie showed may be helpful in separating the two parts. You might also check with your local auto parts store to see if they offer loaner tools for removing a tie rod end that may fit in the space you have.

40 Coupe

05-23-2022 @ 4:33 AM

reply profile send p.m.

Senior
Posts: 1801
Joined: Oct 2009

I am confused with your description of the shocks. If the arm you want to remove has one bolt clamping it to the shock you have to remove the bolt not just remove the nut. If after removing the bolt the arm is still fixed to hard to remove slightly tap a screwdriver in the open area of the arm to pry the arm slightly open, do not over do this since the arm can be broken, just enough to get the arm slightly loose spray with penetrating oil to get the arm to move.

51woodie

05-23-2022 @ 2:46 AM

reply profile send p.m.

Senior
Posts: 561
Joined: Jan 2017

I bought this tool from a local tool supplier, but I believe they are available at a place like Harbor Freight. Not expensive, and small enough that it worked to get the shock linkage separated on my '46 Coupe.

bradshari@aol.com

05-22-2022 @ 8:12 PM

reply profile send p.m.

Member
Posts: 20
Joined: Sep 2021

Hi. I have a 1937 Ford Tudor. The back knee shocks need to be rebuilt. I unbolted them from the frame. I removed the nut where they bend and I can’t get the shocks arm off the bolt part. I tapped its arm to try to unhook it to no avail. Is there a special way to get them apart? The rebuilding place just wants the that is about the size of a can of soup that has the fixed arm on it . Not those other 2 smaller arms. Thank you in advance for your expertise.

<< previous || next >>

NOTE: YOU MUST BE A REGISTERED USER AND BE LOGGED IN TO POST (and reply to) messages in this forum. If you are a first time user, please click the CREATE A NEW ACCOUNT in the masthead above to register and Log In. After that, all you do is LOG IN to enjoy using this site.

DISCLAIMER: The V-8 Club does no independent testing of any of the opinions, thoughts or suggestions presented in the website on the Forum, in the Tech Tips section, or any section. A reader should consider the website to be a forum wherein differing solutions to a particular set of circumstances may be discussed. Ultimately, the selection of an item for an individual's vehicle must be based upon the independent study of the vehicle owner in consultation with people in the hobby and restoration experts.

Early Ford V-8 Club Forum

Merchandise Questions

Membership Questions