Post to the EFV-8 Forum
Post Classified Ads
Shop the Online Store

User Login

Not Registered Yet? Click Here to Sign Up!

Early Ford V-8 Club Forum

FORUM RULES: Users agree to these Rules when using Forum.

The site administrator reserves the right to change the terms and conditions of the user agreement without prior notice to the user. It is the responsibility of the user to regularly review the terms of this agreement.

The user agrees to the following terms:

All information that you provide to us for your membership is correct.
You will not use your membership to spam, harrass, or exploit other members in any way.
Vulgar, Abusive, Racist and Sexist Language will not be tolerated.
Commercial-type sales postings will not be allowed.
No mass posting or flooding of the boards is allowed.
No Advertising of parts or cars; no Ebay or business/commercial ads (please use the "Classified" for ads Wanted or For Sale).
VIEWING MULTIPLE TOPICS ON SCREEN: You can choose to see more than 10 Topics at a time ... Log In and choose "Preferences" from the top bar on the Forum page. Scroll down and Change the "Default Topics Returned" parameter to 25 or 50, and save the changes. Since this setting is stored in your browser 'cookies' (if enabled), it seems to use that stored value even if you are not logged in. So, if you use a PC that you haven't logged into the forum from, the setting still seem to remain at the default.
EXTERNAL PHOTO LINKS ON FORUM: You can still use external photo links in your posts on the new forum. They follow the rules of any link in that they have to have the URL link qualified down to the full image file name (example: .jpg). The links will open in a new browser window, the same as an uploaded image attached to a post. Since an image attachment to any post does not display inline with the post, the results are the same. You can use multiple external links within a post. This link is from photos on a site from Don Clink's 'Deuce@75' albums:

http://donclink.com/deuce_75_1/images/dscn2950.jpg

Using links from photo sites such as Photobucket can help in "size" issue with uploaded attachment files. For best viewing in web browsers, photos should be around the 800x600 pixel range, and probably not more than 1024x768. Most cameras today store HUGE jpg image files, as the default settings are in the 7, 8, 10, and 12Mb image sizes. The image files that are then attached are very large, and the browser can't display the full image size without using the scroll bars. Use the re-sizing functions of your photo editing software to reduce the image to 800x600, which reduces the file sixe and the image load time in the browser. Don uses Google's free Picassa3 software, which is an excellent photo management product. All of the photo albums of the Deuce, Grand National, and Auburn that are links on the NORG site were built using Picassa's web creation functions. And it's free? (THANKS to Don Clink for the info!)
HOW DO I SHOW MY EMAIL ADDRESS ALONG WITH MY USERNAME? You can LogIn on the Forum, and select PREFERENCES. On this page Members can add optional information such as their City,State, Country; Occupation; Hobbies: list a Homepage; list AOL Instant Messanger Handle; Signature; "Make Email Address viewable to others;" and even change the number of Default Topics shown on a page. WHEN others click on your profile, they will see this information.

EFV-8 Club Forum / General Ford Discussion / 1937 front windshield

Reply to Discussion | New Discussion

<< previous || next >>

Posted By

Discussion Topic: 1937 front windshield -- page: 1 2

srg

06-05-2019 @ 1:18 PM

reply profile send p.m.

Member
Posts: 66
Joined: Feb 2019

I'm putting new glass in my windshield. Does anyone have any tips for separating the two halves? All screws are out but the two halves are really fused together. I have tried pounding with a mallet, heat, and penetrant. I could use my porta power with 8000 lbs. torque, but I could really get into a destructive mode using that monster. Any thoughts?
Thank you.

trjford8

06-06-2019 @ 7:17 AM

reply profile send p.m.

Senior
Posts: 4353
Joined: Oct 2009

Have you soaked the gap and screw holes with Kroil or PB blaster? You may need to let it sit for a few days before attempting to get it apart. In the past I have used a block of wood against the bottom of the frame and hit the wood with the hammer.

TomO

06-06-2019 @ 7:35 AM

reply profile send p.m.

Senior
Posts: 7385
Joined: Oct 2009

Soak the sides with a good penetrant like 50/50 mixture of acetone and auto trans fluid. When dealing with parts that are rusted together, patience is the most important part of the operation. You may have to keep doing this for a week or more. Sharp blows, as described by TRJford8, do more to break the rust bond than the steady pressure of the Porta Power.

Tom

1937sedandelivery

06-06-2019 @ 1:20 PM

reply profile send p.m.

Senior
Posts: 501
Joined: Jul 2014

I have gone through this before with three different windshields. They were all difficult to separate. One came apart after soaking and heat applied (it was a standard model so didn't care about the frame discoloring). On the other two, after successfully breaking off at least half the screws (:, the frame halves would not come apart. They were hopelessly rusted together with the internal 1/4" steel stock piece being the catalyst. Desperate situation leads to desperate measures...I hacksawed thru the joint and got a good look at the square stock and how badly it was rusted in place. So, I pulled out the drill and drilled out the stock piece as much as possible, it was several inches long. I couldn't pull out the piece so I pounded it in further, out of the way. Bought some new 1/4" stock from Ace, drilled and tapped four new holes and now have a frame that is ready to assemble, etc.
gregg

srg

06-06-2019 @ 4:51 PM

reply profile send p.m.

Member
Posts: 66
Joined: Feb 2019

Thank you, all of you. Patience is order no.1 for this operation. I will continue to apply penetrant and heat and sharp blows. One side was broke (the glass) and I removed it. I found a spot under it at the joint where the two halves meet with an indent to fit a flat chisel. That may help. I have noticed the square stock insert that joins the two halved is not drilled out, as the exterior of the frame is. It appears the four small screws that button the window together just press against the internal square stock, not screw through it. On the penetrant front, I have used Kroil. Sea Foam, W-D, Rust breaker from W-D, Liquid Wrench and tomorrow I am going to try a mixture of Acetone and brake fluid. I read people's testimonies and they swear by it. The old glass is very thick. Looks like almost 3/8" to 1/2" inch.

This message was edited by srg on 6-6-19 @ 5:03 PM

37 Coupe

06-07-2019 @ 5:33 AM

reply profile send p.m.

Member
Posts: 366
Joined: Oct 2009

If that windshield is 3/8"-1/2" thick I would leave it as it must be the rare Al Capone 1937 Ford.

TomO

06-07-2019 @ 7:26 AM

reply profile send p.m.

Senior
Posts: 7385
Joined: Oct 2009

I have not heard many success stories with brake fluid breaking the rust bond, I do know that it can collect enough water to eat away a brake cylinder.

I would try the trans fluid and acetone mixture. Mix enough so that you cn immerse one end of the frame for a couple of days and then the other end.

I have used Evapo-Rust to remove rust and it does a good job, but I don't know if it would creep into the joint and free up the bond between the parts.
-

Tom

srg

06-07-2019 @ 8:12 AM

reply profile send p.m.

Member
Posts: 66
Joined: Feb 2019

Sorry Tom. I meant to say ATF rather than brake fluid.

srg

06-07-2019 @ 8:22 AM

reply profile send p.m.

Member
Posts: 66
Joined: Feb 2019

That was a good one. I measured and it's two pieces of glass laminated , each 1/8" thick. The gap in the frame is 3/8". The material holding it in the frame was a woven thin, brown material which disintegrated on removal. Did original front window glass have the Ford "crab" or just the other windows?

3w2

06-07-2019 @ 6:51 PM

reply profile send p.m.

Senior
Posts: 877
Joined: Oct 2009

If you mean the Ford script oval safety glass 'bug', the answer is yes although the lettering beneath the oval differs from that in the side and rear windows.

<< previous || next >>

PAGE: 1 2

NOTE: YOU MUST BE A REGISTERED USER AND BE LOGGED IN TO POST (and reply to) messages in this forum. If you are a first time user, please click the CREATE A NEW ACCOUNT in the masthead above to register and Log In. After that, all you do is LOG IN to enjoy using this site.

DISCLAIMER: The V-8 Club does no independent testing of any of the opinions, thoughts or suggestions presented in the website on the Forum, in the Tech Tips section, or any section. A reader should consider the website to be a forum wherein differing solutions to a particular set of circumstances may be discussed. Ultimately, the selection of an item for an individual's vehicle must be based upon the independent study of the vehicle owner in consultation with people in the hobby and restoration experts.

Early Ford V-8 Club Forum

Merchandise Questions

Membership Questions