Posted By |
Discussion Topic:
Fog Lights
|
|
youngster |
02-23-2019 @ 8:47 AM
|
|
|
Member
Posts: 1
Joined: Apr 2017
|
Can anyone help with the wiring diagram for fog lights on a 1935 Ford coupe? Seem to be original lights, with one wire that needs to be connected. Just don't know where to connect it. Any help is greatly appreciated. Thanks, Bill
|
TomO |
02-23-2019 @ 8:58 AM
|
|
|
Senior
Posts: 7244
Joined: Oct 2009
|
Bill, my guess is that you need to connect that one wire to a switch that is fed by 6 volts from the battery side of the fuse panel. The wire from the fuse panel should have an inline fuse holder with a fuse. You can find the battery side of the fuse panel by removing the fuse and using a meter or test light to find 6 volts.
Tom
|
39 Ken |
02-24-2019 @ 6:57 AM
|
|
|
Member
Posts: 380
Joined: Oct 2009
|
The original switch on my '39 has a built in fuse. If the '35 is the same, wire it directly from the battery side of the fuse panel as TomO has suggested. Ken
|
40 Coupe |
02-24-2019 @ 10:36 AM
|
|
|
Senior
Posts: 1650
Joined: Oct 2009
|
Road lights were not offered by Ford as an accessory in 35 they firs appeared in 36. The early road light switches do not have a fuse. A couple of years later the fuse appeared on the ON/Off switch.
|