Posted By |
Discussion Topic:
1947 Pickup Inside Rear View Mirror
-- page:
1
2
|
|
51504bat |
12-25-2024 @ 6:07 AM
|
|
|
Member
Posts: 286
Joined: Apr 2020
|
delete
This message was edited by 51504bat on 12-25-24 @ 6:08 AM
|
rawlir |
12-24-2024 @ 7:33 PM
|
|
|
New Member
Posts: 141
Joined: Oct 2009
|
Here it is....
|
rawlir |
12-24-2024 @ 7:30 PM
|
|
|
New Member
Posts: 141
Joined: Oct 2009
|
I believe that 42/47 inside mirrors were options as well. Since i wrote this discussion i discovered that the mirror in my 1st photo that was not sandblasted fits. I have seen one like it in several Tonner photos. I blasted it, painted it, installed it & all looks good, works good. Still can't figure the trim piece, my trim piece screw holes are 1/2" or so wider than the holes in the inside windshield surrounds???
|
kubes40 |
12-23-2024 @ 10:38 AM
|
|
|
Senior
Posts: 3460
Joined: Oct 2009
|
I can only speak to 1940 and 1941. Both years, the inside mirror was an option. In 1940, the mirror was identical to the passenger car, oval in shape. In 1941 it was rectangular, identical to 1941 passenger cars. the inside mirror was quite useless in reality. If no optional mirror was installed, the trim at the bottom was utilized at the top as well.
Mike "Kube" Kubarth
|
trjford8 |
12-21-2024 @ 8:22 AM
|
|
|
Senior
Posts: 4275
Joined: Oct 2009
|
I think the red piece of trim is for the bottom of the garnish molding that rests on the dash.
This message was edited by trjford8 on 12-21-24 @ 8:23 AM
|
f1ford48 |
12-20-2024 @ 7:51 PM
|
|
|
Member
Posts: 61
Joined: May 2010
|
black one is the F-1 48-52 the middle mirror is correct I believe
|
rawlir |
09-13-2024 @ 7:06 PM
|
|
|
New Member
Posts: 141
Joined: Oct 2009
|
Did ALL 40 & 41's come with a rear view mirror? If not, was there a joint cover with them? I have a 46 pickup that has a black mirror like the top one in my photo & it fits....BUT the center divider in it & my 47 do not have 3 screw holes in the very same position....weird!! Thank you guys!!
|
rawlir |
09-13-2024 @ 7:00 PM
|
|
|
New Member
Posts: 141
Joined: Oct 2009
|
The bottom mirror in my photo does look like it will work, there is 1 screw hole that lines up & fits on the center windshield divider, it places the mirror a little lower that displays backwards thru the rear window better...still can't figure how/why that joint cover screw holes do not line up, i would not think Henry would have had more than one size of those?? Certainly does not look right to just have 2 holes exposed like that....
|
trjford8 |
09-13-2024 @ 8:10 AM
|
|
|
Senior
Posts: 4275
Joined: Oct 2009
|
The cab on a '47 is basically the same as the '40-41 pickup. I suspect that the mirror would be the same as the one used on those pickups.
|
nelsb01 |
09-12-2024 @ 6:23 PM
|
|
|
Senior
Posts: 1022
Joined: Oct 2009
|
I believe that if your pickup was to have a inside rearview mirror, there would be dimples in the metal header above the windshield mouldings. This would be similar to the dimples in the metal header if there were to be sun visors in vehicles. You may have passenger vehicle interior mirrors and that is why the mirror brackets do not line up. Hopefully a late 40's pickup owner will reply and clarify.
|