Posted By |
Discussion Topic:
Transverse Spring Lubrication
-- page:
1
2
|
|
kubes40 |
03-23-2024 @ 6:25 PM
|
|
|
Senior
Posts: 3373
Joined: Oct 2009
|
I agree with you Alan. It was not a very good design in my opinion. And the first time someone pumped grease in there, well, that was "it". When I do a full restoration, I use NOS springs and when they are disassembled and individually finished, I place a smooth coat of fifth wheel grease between each leaf.
Mike "Kube" Kubarth
|
ford38v8 |
03-23-2024 @ 4:49 PM
|
|
|
Senior
Posts: 2739
Joined: Oct 2009
|
Going back to my first post, I called it Fifth Wheel Grease, which it is not. It is Fifth Wheel Lube as others have said, which does not freeze, dry out, or change consistency. For this reason, it is excellent for cable brake cables within their sheathes, and as leaf spring lube, usually requiring disassembly , which allows the dressing of worn spots on the leaves also. The alternative to disassembly is to separate leaves from each other using devices that were sold specifically for the purpose. The center zerk fitting was a novel idea, but never really worked as intended because the lube would squirt out between the leaves before it ever got near the ends.
Alan
|
kubes40 |
03-23-2024 @ 3:41 PM
|
|
|
Senior
Posts: 3373
Joined: Oct 2009
|
If your grease gun is in good condition and of good quality, the STP will not get beyond the internal seals.
Mike "Kube" Kubarth
|
gwistrup |
03-23-2024 @ 3:38 PM
|
|
|
Member
Posts: 29
Joined: Dec 2022
|
How do you put the liquid STP into a grease gun? Do you have a special cartridge to hold the STP so it won't run out the back and sides? If you are going to lube an old spring that has hardened grease in it, I assume you have to disassemble the spring and start over. Is it still preferred to use a product like STP to initially lube the spring leaves?
|
37RAGTOPMAN |
03-11-2024 @ 4:00 PM
|
|
|
Senior
Posts: 1942
Joined: Oct 2009
|
this is what , they used back in the day, GULFTEX GRAPHITE SPRING GREASE, I think you can make this with grease has water repel and some graphite powder and mix them together and put in a special grease gun just for springs, JOHN DEER DEALERS, sell this grease for tractors. hope this helps 37 Ragtopman, Maine
|
kubes40 |
03-05-2024 @ 5:56 AM
|
|
|
Senior
Posts: 3373
Joined: Oct 2009
|
Grease gun works.
Mike "Kube" Kubarth
|
keekeeboy |
03-03-2024 @ 9:34 PM
|
|
|
Member
Posts: 3
Joined: Jan 2024
|
How do you go about getting the ATF into the spring ? Thanks, Kenny C
|
alanwoodieman |
02-22-2024 @ 7:12 PM
|
|
|
Senior
Posts: 864
Joined: Oct 2009
|
5th wheel lube is sticky but will not run down the springs to lube them unless you take them apart. synthetic chassis grease will not harden and does work
|
40 Coupe |
02-22-2024 @ 8:11 AM
|
|
|
Senior
Posts: 1649
Joined: Oct 2009
|
5th wheel lube is also a suggestion, can be found at truck stops or parts stores.
|
kubes40 |
02-21-2024 @ 2:15 PM
|
|
|
Senior
Posts: 3373
Joined: Oct 2009
|
I use STP oil treatment now that I have run dry the pail of Ford spring lubricant purchased decades ago. Grease is a big "no no".
Mike "Kube" Kubarth
|