Posted By |
Discussion Topic:
Body Wiring Clips:
-- page:
1
2
|
|
fortyford |
09-08-2020 @ 4:41 AM
|
|
|
Member
Posts: 206
Joined: Nov 2009
|
Thanks,Kube.I can't understand on the new body wiring harness I have it seems to be a might to long?I had to kinda loop a small amount up about were the master cylinder is?The old one I took out was the same way?Is there by chance a difference in sedan,coupe or sedan delivery?If I stretched it on out to very rear of car I would come up short on my brake light wires to master cylinder?Does this make since?Just wondering if anyone else has ran into this problem?
|
kubes40 |
09-07-2020 @ 5:44 PM
|
|
|
Senior
Posts: 3370
Joined: Oct 2009
|
I'll soon be wiring my latest project, another '40 coupe. If you want photos of where the wire passes through the floor or anything else, let me know.
Mike "Kube" Kubarth
|
fortyford |
09-07-2020 @ 3:21 PM
|
|
|
Member
Posts: 206
Joined: Nov 2009
|
Thanks,Kube.I am working on a coupe.
|
kubes40 |
09-07-2020 @ 2:55 PM
|
|
|
Senior
Posts: 3370
Joined: Oct 2009
|
The harness that runs back is placed along the outer frame rail - at the bottom. Typically four clips hold it in place. When it reaches the leg of the "X" member, it is fed through the hole in the frame at that junction and continues back. There is a short pig tail in this harness near (adjacent) the front of the fuel tank. There should be a hole in the floor pan near the reinforcement / body mount in the pan. The wire comes up through there and is connected to the wiring that ultimately goes to the license lamp. That hole in the pan got sealed with body putty - a clay like substance. What body style are you working with?
Mike "Kube" Kubarth
|
fortyford |
09-07-2020 @ 2:46 PM
|
|
|
Member
Posts: 206
Joined: Nov 2009
|
The body harness from fire wall back to rear and Kube I think you said the tail light cross over clips to the rear frame brace?I don't understand the license plate light.I came up short on the wiring for it.Got new bulb socket with pig tail and new wire which runs through trunk lid.I guess I will need about 3.5 ft. more to go through trunk pan to power source????
|
kubes40 |
09-07-2020 @ 6:29 AM
|
|
|
Senior
Posts: 3370
Joined: Oct 2009
|
I am not aware of any chart from Ford that describes the placement. Which harness (exactly) are you wondering about?
Mike "Kube" Kubarth
|
fortyford |
09-07-2020 @ 6:23 AM
|
|
|
Member
Posts: 206
Joined: Nov 2009
|
I was just curious if there is a diagram on where all the wiring clips and how the body wiring is routed from front to rear on a 40.
|