Post to the EFV-8 Forum
Post Classified Ads
Shop the Online Store

User Login

Not Registered Yet? Click Here to Sign Up!

Early Ford V-8 Club Forum

FORUM RULES: Users agree to these Rules when using Forum.

The site administrator reserves the right to change the terms and conditions of the user agreement without prior notice to the user. It is the responsibility of the user to regularly review the terms of this agreement.

The user agrees to the following terms:

All information that you provide to us for your membership is correct.
You will not use your membership to spam, harrass, or exploit other members in any way.
Vulgar, Abusive, Racist and Sexist Language will not be tolerated.
Commercial-type sales postings will not be allowed.
No mass posting or flooding of the boards is allowed.
No Advertising of parts or cars; no Ebay or business/commercial ads (please use the "Classified" for ads Wanted or For Sale).
VIEWING MULTIPLE TOPICS ON SCREEN: You can choose to see more than 10 Topics at a time ... Log In and choose "Preferences" from the top bar on the Forum page. Scroll down and Change the "Default Topics Returned" parameter to 25 or 50, and save the changes. Since this setting is stored in your browser 'cookies' (if enabled), it seems to use that stored value even if you are not logged in. So, if you use a PC that you haven't logged into the forum from, the setting still seem to remain at the default.
EXTERNAL PHOTO LINKS ON FORUM: You can still use external photo links in your posts on the new forum. They follow the rules of any link in that they have to have the URL link qualified down to the full image file name (example: .jpg). The links will open in a new browser window, the same as an uploaded image attached to a post. Since an image attachment to any post does not display inline with the post, the results are the same. You can use multiple external links within a post. This link is from photos on a site from Don Clink's 'Deuce@75' albums:

http://donclink.com/deuce_75_1/images/dscn2950.jpg

Using links from photo sites such as Photobucket can help in "size" issue with uploaded attachment files. For best viewing in web browsers, photos should be around the 800x600 pixel range, and probably not more than 1024x768. Most cameras today store HUGE jpg image files, as the default settings are in the 7, 8, 10, and 12Mb image sizes. The image files that are then attached are very large, and the browser can't display the full image size without using the scroll bars. Use the re-sizing functions of your photo editing software to reduce the image to 800x600, which reduces the file sixe and the image load time in the browser. Don uses Google's free Picassa3 software, which is an excellent photo management product. All of the photo albums of the Deuce, Grand National, and Auburn that are links on the NORG site were built using Picassa's web creation functions. And it's free? (THANKS to Don Clink for the info!)
HOW DO I SHOW MY EMAIL ADDRESS ALONG WITH MY USERNAME? You can LogIn on the Forum, and select PREFERENCES. On this page Members can add optional information such as their City,State, Country; Occupation; Hobbies: list a Homepage; list AOL Instant Messanger Handle; Signature; "Make Email Address viewable to others;" and even change the number of Default Topics shown on a page. WHEN others click on your profile, they will see this information.

EFV-8 Club Forum / General Ford Discussion / 1939 temperature sending and steady rod removal

Reply to Discussion | New Discussion

<< previous || next >>

Posted By

Discussion Topic: 1939 temperature sending and steady rod removal -- page: 1 2

MICHV8

04-17-2025 @ 6:17 AM

reply profile send p.m.

Senior
Posts: 500
Joined: Jul 2010

Thanks folks...I'm working on it!

TomO

04-16-2025 @ 8:18 AM

reply profile send p.m.

Senior
Posts: 7386
Joined: Oct 2009

The temperature bulb probably has some calcium deposits keeping it from releasing. Try vinegar or CLR to free it up.

Tom

39 Ken

04-16-2025 @ 5:04 AM

reply profile send p.m.

Member
Posts: 382
Joined: Oct 2009

Here's an idea out of left field so consider it as such...

Pull the head off and leave it there. Pull the motor and start your work on
that, all the while soaking the temp bulb with MMO and acetone
mix until it loosens.

If it never loosens up and the head doesn't need work, then remount the
head after the motor is installed.

As mentioned, an odd approach, and obviously a last resort solution to save the
temp sender.

MICHV8

04-15-2025 @ 8:27 AM

reply profile send p.m.

Senior
Posts: 500
Joined: Jul 2010

I'll give that a shot. The angle of the head opening and the bulb doesn't allow much leverage. I've tried an open end box wrench underneath the tube, but once again, hard to get any upward leverage... Thanks for the hint

carcrazy

04-14-2025 @ 8:23 PM

reply profile send p.m.

Senior
Posts: 1992
Joined: Oct 2009

To apply pressure to the bottom of the capillary bulb in the cylinder head, you can try using a brake spoon or another "L" shaped tool. The tool will provide a fulcrum for you apply an upward force on the bulb through leverage.

MICHV8

04-14-2025 @ 11:32 AM

reply profile send p.m.

Senior
Posts: 500
Joined: Jul 2010

I heated the round steady rod nut and followed Mike's advice to keep the ground bolt slightly too large and tapped it in the recess. Both twisted free with some torque...thanks to all.

marko39

04-14-2025 @ 5:07 AM

reply profile send p.m.

Member
Posts: 45
Joined: Sep 2016

for the steady rods, i use a piece of key stock and a wrench to unscrew.

kubes40

04-14-2025 @ 5:02 AM

reply profile send p.m.

Senior
Posts: 3580
Joined: Oct 2009

The end of the rod requires a square driver. It is 5/16". Be certain the clean any junk out of the recess so the driver can be inserted all the way.
You can buy a square drive or grind back a 3/8" ratchet extension. If you grind back an extension, make it on the tight side and pound it into the recess a bit.

The bulb gets pulled through the instrument panel (aka firewall) to remove. In other words, the unit is removed through the passenger compartment.

The best wrench for turning that sending unit is termed a flare nut wrench.

Mike "Kube" Kubarth

This message was edited by kubes40 on 4-14-25 @ 5:03 AM

MICHV8

04-14-2025 @ 4:52 AM

reply profile send p.m.

Senior
Posts: 500
Joined: Jul 2010

I had no problem getting the nut off, but the capillary tube is stuck fast. I've soaked the head overnight with a 50/50 mix of acetone and automatic transmission fluid. I will try to apply heat to the head while staying away from the tube. I took the radiator hose off and can access the capillary tube, but can't think of a way to apply upward pressure from inside the head.
Thanks for the help

This message was edited by MICHV8 on 4-14-25 @ 4:31 PM

carcrazy

04-13-2025 @ 10:42 PM

reply profile send p.m.

Senior
Posts: 1992
Joined: Oct 2009

To remove the temperature gauge sender for the '39 Ford which is mounted in the top of the driver's side cylinder head use either:
a special 5/8" sending unit wrench ( Snap-on) makes one
or a 5/8" hex (six sided) box wrench which has been modified with a slot cut into it so the gauge capillary tube can pass through it.

If the sender is truly stuck in the head, try soaking it with a good penetrating oil. Be patient, you don't want to round off the hex of the temperature sensor. If after a day or so of soaking the sending unit with penetrant, it still won't move, you may have to apply some heat to it - be very careful with heat as you don't want to over heat the gauge and ruin it.

<< previous || next >>

PAGE: 1 2

NOTE: YOU MUST BE A REGISTERED USER AND BE LOGGED IN TO POST (and reply to) messages in this forum. If you are a first time user, please click the CREATE A NEW ACCOUNT in the masthead above to register and Log In. After that, all you do is LOG IN to enjoy using this site.

DISCLAIMER: The V-8 Club does no independent testing of any of the opinions, thoughts or suggestions presented in the website on the Forum, in the Tech Tips section, or any section. A reader should consider the website to be a forum wherein differing solutions to a particular set of circumstances may be discussed. Ultimately, the selection of an item for an individual's vehicle must be based upon the independent study of the vehicle owner in consultation with people in the hobby and restoration experts.

Early Ford V-8 Club Forum

Merchandise Questions

Membership Questions