Posted By |
Discussion Topic:
original 34 V8 motor. I need to buy one. I hear i
|
|
37RAGTOPMAN |
11-10-2020 @ 10:01 AM
|
|
|
Senior
Posts: 1943
Joined: Oct 2009
|
hi are you going for show, for points, or for a driver, cause a late 36 has insert bearing, and 37 engines also insert will bolt in with no problems, you have to use plates on where the 37 water pumps would be and use 34 heads, but when done will look like a 34 engine, earlier engines were Babbitt bearing, not that is bad, I have a 37 engine that needs 3 sleeves , hope this helps, 37Ragtopman Maine,,,,
|
dann |
11-10-2020 @ 6:43 AM
|
|
|
Member
Posts: 3
Joined: Nov 2016
|
I've got a complete running 21 stud 36 flathead,with mallory 12 volt dist. here in ohio if interested call dann at 330-440-5412 oil pan to air cleaner
|
40 Coupe |
08-20-2020 @ 10:05 AM
|
|
|
Senior
Posts: 1651
Joined: Oct 2009
|
In addition to Kubes comment above if you want a 33-34 engine look for that. The 35-36 engines are different.
|
kubes40 |
08-19-2020 @ 11:05 AM
|
|
|
Senior
Posts: 3375
Joined: Oct 2009
|
I'm willing to bet placing a wanted ad in the actual "wanted" section may work even better.
Mike "Kube" Kubarth
|
CharlieStephens |
08-18-2020 @ 6:21 PM
|
|
|
Senior
Posts: 882
Joined: Oct 2009
|
Placing a wanted ad here (https://www.earlyfordv8.org/classifieds.cfm?t=Wanted&c=Parts), on Fordbarn (https://www.fordbarn.com/forum/forumdisplay.php?f=18) and on HAMB (https://www.jalopyjournal.com/forum/forums/wanted.30/) will probably turn something up. Good Luck. Charlie Stephens
|
logan238 |
08-18-2020 @ 1:58 PM
|
|
|
Member
Posts: 12
Joined: Mar 2020
|
I need to buy a 34 to 36 motor for my cabriolet. I'm in utah ,know of one/
|