| Posted By |
Discussion Topic:
Body number-1936 Coupe
-- page:
1
2
|
|
wmsteed |
07-02-2019 @ 9:49 AM
|
|
|
|
Senior
Posts: 613
Joined: Oct 2009
|
My '36, Delux 5 win cpe, with a production date of sometime in Aug 36, back window dated 8-36, does not have a body tag, never did have one. No holes in cowl where a tag would have been mounted.
Bill 36 5 win delx cpe
|
TomO |
07-02-2019 @ 6:42 AM
|
|
|
|
Senior
Posts: 7386
Joined: Oct 2009
|
Don is the "Go To Guy" for 35 and 36 Fords. I like your car. If it were mine, I would look for a 36 coil and have it rebuilt by Skip Haney. In the meantime, I would relocate the coil closer to the front of the engine. Having such a long high tension lead can lead to a weak spark at the plugs.
Tom
|
Don Rogers |
07-01-2019 @ 7:13 PM
|
|
|
|
Senior
Posts: 512
Joined: Oct 2009
|
Thanks Mike. I can certainly same the same about you and 1940 Fords!!
|
Mss64056 |
07-01-2019 @ 6:21 PM
|
|
|
|
Member
Posts: 24
Joined: May 2019
|
Thank you Good to know I’m having fun but have a few blanks to fill in
|
kubes40 |
07-01-2019 @ 4:49 PM
|
|
|
|
Senior
Posts: 3577
Joined: Oct 2009
|
mss64056, Anytime you need the definitive answer to any '36 Ford related stuff, go directly to Don Rogers, the club's advisor. The guy is amazing and always very helpful.
Mike "Kube" Kubarth
|
Mss64056 |
07-01-2019 @ 4:24 PM
|
|
|
|
Member
Posts: 24
Joined: May 2019
|
Thanks everyone.
|
kirkstad |
07-01-2019 @ 7:00 AM
|
|
|
|
Member
Posts: 204
Joined: Jul 2017
|
My 36 5/w has a body tag 770 8958 no dash only space. Frank
|
kubes40 |
07-01-2019 @ 5:24 AM
|
|
|
|
Senior
Posts: 3577
Joined: Oct 2009
|
Don, thank you. I was hoping you'd weigh in here. I learned (again) from you Much obliged!
Mike "Kube" Kubarth
|
Don Rogers |
07-01-2019 @ 4:01 AM
|
|
|
|
Senior
Posts: 512
Joined: Oct 2009
|
Your repro body tag is incomplete and should have additional production numbers after the 770. Murray did make most, if not all of Ford's 3-window(720) and 5-window(770) in 1935 and 1936. Their bodies would have had a body plate and it looked similar to your reproduction. Enclosed is a photo of what I believe to be an original 1935 Murray plate for a 1935 (48 prefix) 3-window coupe ( body #15505).
|
40 Coupe |
07-01-2019 @ 3:48 AM
|
|
|
|
Senior
Posts: 1801
Joined: Oct 2009
|
I too do not believe the coupe should have a body tag in 36. Usually open car and commercial vehicles had the tag. below is one photo of original body tags from 36 (Phaeton) as well as a reproduction with the correct number font. There is no dash between the body style and the Mfg. serial number. Each body manufacturer had a slightly different tag style.
This message was edited by 40 Coupe on 7-1-19 @ 3:50 AM
|