Posted By |
Discussion Topic:
36 Gauge cluster
|
|
bbook |
02-26-2012 @ 7:35 PM
|
|
|
Member
Posts: 30
Joined: Jun 2011
|
In my '36 1.5 ton, there are gauge clusters (oil/gas & temp/amp) on each side of the speedometer, which I believe is the same as the pickup. The gas gauge is hydrostatic. Will the passenger car cluster with the electric gas gauge fit in the same space?
|
alanwoodieman |
02-26-2012 @ 8:23 PM
|
|
|
Senior
Posts: 864
Joined: Oct 2009
|
yes
|
bbook |
02-27-2012 @ 11:28 PM
|
|
|
Member
Posts: 30
Joined: Jun 2011
|
Thanks. That opens more options. The hydrostatic sender comes out of the bottom of the gas tank. Is there any way to convert this to electric?
|
TomO |
02-28-2012 @ 8:12 AM
|
|
|
Senior
Posts: 7243
Joined: Oct 2009
|
The electric sending unit must be mounted in the top of the tank. You might look for a later under seat tank (37-40) that uses the electric sending unit. I would look for a NOS or a good used one. I don't know of any body that makes a replacement tank. Be sure that you measure the tank and mounting points as a later tank may not be a direct replacement.
Tom
|
bbook |
02-28-2012 @ 10:28 PM
|
|
|
Member
Posts: 30
Joined: Jun 2011
|
So, in the trucks, they started putting the electric sender in as of '37? I'm assuming that a pickup tank will work, although I recall that, at least in the '36, the pickup has the gas filler on the outside and the big truck is inside the cab.
|
nelsb01 |
02-29-2012 @ 2:07 PM
|
|
|
Senior
Posts: 975
Joined: Oct 2009
|
I think that you will find that in 1936 (at least the 112 wheel base) there were electric tank gauges.
|
alanwoodieman |
02-29-2012 @ 6:40 PM
|
|
|
Senior
Posts: 864
Joined: Oct 2009
|
I have a 41 truck (3/4 ton and up same) I used a poly fuel tank in between the frame rails under the stake bed body. I really did not want the fuel tank under my butt!! I have a 41 under seat fuel tank with top mounted sender if you are interested.
|
voced |
03-04-2012 @ 5:55 AM
|
|
|
Member
Posts: 86
Joined: Oct 2009
|
I have the same situation and plan on drilling a hole in the top to install the electric sending unit. I just hope it works out fine.
|
bbook |
03-24-2012 @ 8:23 PM
|
|
|
Member
Posts: 30
Joined: Jun 2011
|
Let me know how the tank alteration goes voced. It would be nice to stay with the original tank configuration, but with an electric sending unit.
|