Flatbob | -- 03-19-2012 @ 2:15 PM |
These are lite sockets I got when restoring my '36 many years ago but don't remember what they're for, could they be headlamp? They are displayed in pairs.
|
|
Flatbob | -- 03-19-2012 @ 4:41 PM |
Maybe the bottom two pieces are for a locking mechanism?
|
|
ford38v8 | -- 03-19-2012 @ 6:57 PM |
None of them appear to be from the '32-'53 Ford Era. They may be aftermarket sockets. Alan
|
|
Flatbob | -- 03-19-2012 @ 9:27 PM |
Alan, the only thing I know for sure is that the pictured pieces were in one of many boxes of '36 parts I have in my shed that I'm cleaning out. I'll see if two headlamp bulbs I have will fit in the sockets. Thanks for responding. Bob
|
|
flatheadfan | -- 03-21-2012 @ 1:57 AM |
I have some of these around the shop. They are after-market sockets for replacing parking lights in early Fords. If you buy a replacement headlight loom for a '35 or '36 from someone like Mac's they will come with this socket rather than the spring-loaded original type. In some respects I like them better than the original, they are easier to install and remove bulbs from. Tom
|
|
trjford8 | -- 03-21-2012 @ 10:22 AM |
I have some of them also. They are a very good socket and as Tom says the bulbs are easy to install and change. They also make a good ground to the reflector.
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=4483 |