| rustedorrotting | -- 08-30-2022 @ 12:27 PM |
|
I have a 41 flathead 8 that has very high compression (175) and appears to have a hot cam (13 hg) at idle. I have heard some people say I should use 94's instead of the 97's I currently have mounted on the engine. I would appreciate any advice on this matter
|
|
| ford38v8 | -- 08-30-2022 @ 2:40 PM |
|
If the posted picture is of your engine, you are running 3 Ford Holley 94s. Opinions are like assholes. Everybody has one. Alan This message was edited by ford38v8 on 8-30-22 @ 2:41 PM
|
|
| rustedorrotting | -- 08-30-2022 @ 7:00 PM |
|
Only the center carb is connected, but they look good! Would 97's be better?
|
|
| JayChicago | -- 08-31-2022 @ 5:33 AM |
|
You may do better to ask these questions on the Ford Barn site. Many experienced hot rodders over there.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=15916 |