| martin | -- 04-04-2021 @ 12:25 AM |
|
Hi Where can I find where the wiring harness goes around the engine bay. Not electrical installation just routing information Thanks Martin
|
|
| zeke3 | -- 04-04-2021 @ 7:41 AM |
|
Check out the wiring diagram for the 1936 model on Mac Van Pelt's website. It a copy of the original Ford drawing showing the general routing of the harnesses and the clip locations. On vanpeltsales.com, click on "electrical parts and prices" and then click on "ignition wiring drawings" to get to the links for the wiring diagrams and schematics.
|
|
| camsaure | -- 04-04-2021 @ 8:08 PM |
|
I have an all original 36/low miles. Do you have any particular questions or certain details you are wondering about?
|
|
| martin | -- 04-04-2021 @ 11:15 PM |
|
Thanks I will have a look
|
|
| martin | -- 04-04-2021 @ 11:17 PM |
|
How the harness runs at front of engine Thanks
|
|
| Don Rogers | -- 04-09-2021 @ 7:57 AM |
|
Here's some photos of my 35 engine comp that might help. Please note that originally the headlight/horn crossover wiring was held in place by clips on the bottom of the radiator.
|
|
| Don Rogers | -- 04-12-2021 @ 2:38 PM |
|
Martin. Did the photos help??
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=14730 |