| MICHV8 | -- 09-16-2018 @ 6:27 AM |
|
I'm trying to figure out how the remove the casing...the trip odometer stem is bigger than the hole. Does the knurled head unscrew? Thanks!
|
|
| Jcoles | -- 09-17-2018 @ 5:11 AM |
|
The stem unscrews on a '36 odometer, so it may be the same for a '39.
|
|
| MICHV8 | -- 09-17-2018 @ 5:17 AM |
|
thanks...do you mean the knurled head alone or the entire post (stem)?
|
|
| Jcoles | -- 09-18-2018 @ 11:22 AM |
|
The entire stem unscrews, which I discovered the hard way. I had assumed it was a press-in fit, so I pulled the stem out, only to realize I'd yanked the gear off the end. But fortunately, I was able to straighten the gear and solder it back together.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=12345 |