| Ccaz | -- 02-04-2018 @ 2:30 PM |
|
My engine block along the oil pan rail has 15 threaded holes for oil pan bolts but the last hole above where the starter goes near the flywheel bell housing has a larger none threaded hole. Does this pan only take 15 bolts rather than 16? any help will greatly be appreciated. See photo of area under question
|
|
| lawrie | -- 02-04-2018 @ 6:47 PM |
|
There is a bolt that comes in from the top of that hole into a threaded hole in the oil pan. Lawrie
|
|
| Ccaz | -- 02-06-2018 @ 4:23 PM |
|
Great! Thanks you solved the problem. Is it true that this bolt needs to be 1/8 in longer than the other oil pan bolts?
|
|
| lawrie | -- 02-13-2018 @ 2:11 PM |
|
Yes
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=11625 |