| rawlir | -- 02-07-2024 @ 7:43 PM |
|
Can anyone shed light on the purpose of the 2 braces (9" to 10" long) (1 in front of driver tire & 1 on the corresponding other side) that bolts to the front fenders & then back to frame rail. Secured by a bolt with a spring on it. Only thing i can think of is providing some flex, anything else? Thank you!
|
|
| trjford8 | -- 02-09-2024 @ 7:54 AM |
|
Rick, those should be the supports for the inner fender panel which in turn supports the front fenders. The springs should allow for flexing of the front sheetmetal.
|
|
| rawlir | -- 02-09-2024 @ 5:38 PM |
|
Thank you for the feedback......flexability is the only thing i could come up with, seems Henry's engineering on this a little off.....
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=16903 |