mike39 | -- 01-23-2022 @ 3:09 PM |
Anyone have a pic of where the fuse/resistor block mounts ? I just dont see where it mounts. Maybe im missing something ? In my defense im working with a 100% basket case. Thanks. Mike
|
|
37RAGTOPMAN | -- 01-26-2022 @ 7:01 AM |
mike39 do you have any photos of your fuse- resister block, ? has a 1 ignition coil resister and 1 30 amp fuse If it is like a 37, you should see 2 small holes on the outside of firewall, on LS the fuse resister block get mounted on the inside, do you have any manuals on your truck ? they do help , even a owners manual for your truck, hope this helps 37Ragtopman
|
|
mike39 | -- 01-26-2022 @ 4:58 PM |
I have this repro fuse/resistor block. There are no holes in the firewall that fit this.
|
|
mike39 | -- 01-30-2022 @ 2:26 PM |
My solution for mounting the fuse block. I couldnt stand to drill through my fresh painted firewall. The push in fasteners hold it to the pad just fine
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=15444 |