| shoebox | -- 08-19-2021 @ 12:27 PM |
|
As detailed in another thread, I learned how to remove inside door window molding. I now need to remove the glass from the door. I need to detach the bottom glass channel from the regulator arms. Does anyone know if this is done by first detaching the regulator from the door? Ultimately, does the glass come out the top or ??
|
|
| trjford8 | -- 08-20-2021 @ 8:41 AM |
|
Drop the regulator and glass down to the bottom of the door. You then slide the regulator off the glass channel. Take the regulator out of the door and then take out the glass.
|
|
| shoebox | -- 08-20-2021 @ 4:54 PM |
|
trjford8, Thank you for your response. What you described is what I expected I was to do. HOWEVER there is a better way, which I have just done. There is a small nut (see pic) that holds in a "bottom stop." Remove the nut and the part on the other side and you can roll the window down till the rollers come out of the channels. Rotate the glass 90 degrees and remove out the top.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=16&Topic=15088 |