Topic: Lower radiator hose; heater fitting

sarahcecelia	-- 08-26-2019 @ 1:03 PM
	"Kubes," I used that Indian Head sh*llac on the fitting, inside and outside, like you said to ensure no leakage. Question: How long should I wait before adding my coolant?? A couple of hours; or over night??? Regards, Steve Lee
kubes40	-- 08-26-2019 @ 6:01 PM
	Steve, read the instructions Mike "Kube" Kubarth
sarahcecelia	-- 08-27-2019 @ 9:17 AM
	"Kubes," I did follow the instructions in the bottle, and assembled the parts on the hose about 15-20 minutes later, when they were "tacky " to a light touch with my finger. It oozed out just a very little around the edge of the outer piece when I tightened the large nut, and what oozed out around the edges and had a very light tan color. My question is and was: How long after you sh*llac and install those parts, do I have to wait to put my coolant in, or can I put it in right away? Regards, Steve Lee This message was edited by sarahcecelia on 8-27-19 @ 9:21 AM
kubes40	-- 08-27-2019 @ 12:02 PM
	Put it in now Mike "Kube" Kubarth

EFV-8 Club Forum :	https://www.earlyfordv8.org/forum
Topic:	https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=14&Topic=13167