Posted By |
Discussion Topic:
vin number
-- page:
1
2
|
|
engine |
04-09-2014 @ 3:07 PM
|
|
|
New Member
Posts: 103
Joined: Dec 2012
|
That is the only numbers that are on the frame ,none under the cab nor at the top on the frame at the rear end.I am aware of the stars,so the mystery goes on.Thanks
|
trjford8 |
04-09-2014 @ 8:38 AM
|
|
|
Senior
Posts: 4203
Joined: Oct 2009
|
As Tom op says the VIN # should be on the top of the left frame rail between the steering box and the front crossmember. I have found that on most 40's the number is very near the front crossmember. The number you give is not a 40 number. Perhaps the C could be a lightly stamped 0. there should be a star stamp at the beginning of the number and at the end of the number.
|
TomO |
04-09-2014 @ 8:26 AM
|
|
|
Senior
Posts: 7244
Joined: Oct 2009
|
The serial number should be on the frame near the steering box. The numbers that you posted do not fit the serial number range for 1940. Here is a link to the serial numbers used by Ford. http://www.vanpeltsales.com/FH_web/flathead_serialnumbers.htm
Tom
|
engine |
04-08-2014 @ 3:45 PM
|
|
|
New Member
Posts: 103
Joined: Dec 2012
|
I have a 40 Pickup and am trying to find out the correct numbers.The first one is a 9.Then a C and 4 more numbers.I have checked and believe the C is for the half ton pickup, but not sure of the 9 and also only 4 number for the remaining serial number.It may be that it was that low of a production number.Can anyone shed some light on it.Thanks
|