| admiral1960 | -- 12-06-2012 @ 3:04 PM |
|
What is the thread size of the Ratchet Bolt that holds the pulleys on the end of the crankshaft (P/N 81A 6319). I suspect it is 5/8-18 Allen E Michler AW1, USNR (10 yrs) LTC, TC, USAR (29 yrs)
|
|
| supereal | -- 12-07-2012 @ 10:13 AM |
|
Yes, the threaded part is 5/8 - 18 by 1"
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=5502 |