| BeerMoney-49 | -- 07-16-2011 @ 11:53 AM |
|
Hello im new here and i am having trouble finding some wire type clips for a peice of molding that goes on the dash, the back of the molding is about 1\4 in wide and the hole it goes in is about 1\8 in. i was told by Dennis carpenter that i might get some help from here. If anyone knows where i can get these clips i would sure appreciate it. i put a pic of the clip here
|
|
| supereal | -- 07-16-2011 @ 2:35 PM |
|
Try Bob Drake, 800/221-3673.
|
|
| oldford2 | -- 07-16-2011 @ 5:20 PM |
|
If you only need a few, it looks like a pretty easy clip to bend up yourself. Try it, you might be surprised. Spring steel wire might be best but plain wire will work. John
|
|
| trjford8 | -- 07-16-2011 @ 8:01 PM |
|
Try Concours Parts in Nevada at #775-882-5100 or C and G Parts in California at #760-740-2400. Both carry mid fifties Ford parts.
|
|
| TomO | -- 07-17-2011 @ 7:31 AM |
|
Try http://www.restorationspecialties.com/ They have a large supply of clips. Tom
|
|
| BeerMoney-49 | -- 07-17-2011 @ 6:14 PM |
|
thanks alot guys i hope i can find these this is what im restoring for my grand son when he graduates next year.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=3400 |