| Fordfan1 | -- 04-10-2024 @ 1:39 PM |
|
Connecting the wires to the oil pressure gauge on my 35, ignition switch wire to the top terminal sending unit wire to the bottom or-??? OK let me rephrase this the gauge is installed in the dash it has two terminals one above the other which there are two wires going to the gauge a yellow with black tracer from the sending unit the other is black with a green tracer the 6 volt feed which wire goes to which terminal-? Thanks' Mike This message was edited by Fordfan1 on 4-12-24 @ 10:02 AM
|
|
| 40 Coupe | -- 04-11-2024 @ 6:34 AM |
|
The ignition switch has no wires to the oil pressure gauge or it's sending unit. The sending unit has just one electrical terminal on it's top.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=16987 |