| RAK402 | -- 01-15-2021 @ 2:58 PM |
|
While I was under the 1940 Ford today (changing the evil little rubber ball on the radius arm), I bumped the Parking Brake Cable Housing and heard a familiar rattle (a rattle I have heard for years but could never find until now). How is the cable housing supposed to be restrained in that area (where is passes through the frame? Is there a clamp or a grommet that should be there? As always, thank you all in advance!
|
|
| kubes40 | -- 01-15-2021 @ 4:06 PM |
|
There's a round grommet located on the "front" of the "X" member where the cable passes through. They are readily available from Carpenter and others. I might suggest you slit the grommet and work it in around the cable. Otherwise you'll need to remove the cable. Mike "Kube" Kubarth
|
|
| RAK402 | -- 01-15-2021 @ 7:03 PM |
|
Mike, Thank you! There is no grommet in mine! That explains it-I will be ordering one shortly!
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=14504 |