| cwaszczyk | -- 08-11-2020 @ 2:53 PM |
|
My 49 has a turn signal switch in it but it doesn’t work. It doesn’t have a fuse or anything and the wiring is very hokey. I’m thinking of getting a new unit. But I’m currently running 6v system and planning on going to 12v. Can I use a 12v switch on the 6v system until I switch over?
|
|
| carcrazy | -- 08-11-2020 @ 3:51 PM |
|
Yes, you can use a 12V turn signal system with 6 V. You will have to use a 6V bulb for the turn signal indicator and a 6V flasher unit.
|
|
| TomO | -- 08-13-2020 @ 7:47 AM |
|
I don't know what you mean by saying your turn signal wiring is "hokey", but I would determine why the signals do not work and if there are parts to repair it before investing in a new switch that may not fix your problem. Tom
|
|
| cliftford | -- 08-13-2020 @ 8:31 AM |
|
I don't know what your level of expertise is, but a good auto electrican can take an ohm meter and figure out where each wire goes.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=14060 |