| mfirth | -- 03-28-2020 @ 10:39 AM |
|
Wandering if anyone else is running the EBV carb from the 239 Y- block on an 8BA flathead , and what main jet size you're using. Lots-a-thanks in advance! mike
|
|
| 42merc | -- 03-28-2020 @ 4:03 PM |
|
Don't wander too far. Both engines are 239 cubic inch, the Y block carb should work fine as is. This message was edited by 42merc on 3-28-20 @ 4:04 PM
|
|
| mfirth | -- 03-29-2020 @ 4:49 AM |
|
True, same cubic inch, but, the EBV has a slightly larger throttle bore. That's why i was wondering.......about jet size. Thanks.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=13703 |