| fortywunsforever | -- 07-19-2019 @ 12:21 PM |
|
I have a couple of complete ignition switch assy that fit my 41 Sedan. I also have a couple that have mounting holes in the opposite locations. Anyone out there know what they may fit? The first picture is the one in my 41, the second is the one I need to identify. Thanks. This message was edited by fortywunsforever on 7-19-19 @ 1:06 PM
|
|
| supereal | -- 07-21-2019 @ 11:08 AM |
|
It appears that you have been sent the wrong switch body. The necessary parts, the body and brush, are in a kit from C&G as 81A/3704/-9K, $20. 800/266-o470.
|
|
| fortywunsforever | -- 07-27-2019 @ 8:37 AM |
|
Supereal, what does the second , (right hand photo) fit? Any ideas. The one on the left fits my 41. Thanks.
|
|
| rustedorrotting | -- 09-09-2019 @ 5:31 PM |
|
i believe my 41 pickup has the switch in your right hand photo. I have a 3 on the column and the standard switch would not work. I had to make some of the parts as i could not locate them. the pin that holds the column lock from turning i had to fabricate from scratch.
|
|
| 51woodie | -- 09-11-2019 @ 1:24 AM |
|
41 I can't help you with the right hand, but the left looks the same as my '46
|
|
| martinbrown23 | -- 09-13-2019 @ 4:57 AM |
|
this is I ordered from amazon for my sedan I have to order one more for my frod f150 truck which I am currently using for car towing service, in new york, it takes some time to start i have checked the battery is fine so I decided to change the battery. This message was edited by martinbrown23 on 9-13-19 @ 4:58 AM
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=13083 |