ken ct. | -- 03-10-2018 @ 11:51 AM |
Need name and # for SR in Ma. that took over for Bill. thank you ken ct email.
|
|
40cpe | -- 03-10-2018 @ 12:11 PM |
Andy Falandes <andys.shoxs@gmail.com>
|
|
ken ct. | -- 03-10-2018 @ 1:18 PM |
Thank you 40 coupe. ken ct.
|
|
40cpe | -- 03-10-2018 @ 2:07 PM |
You're welcome!
|
|
ken ct. | -- 03-10-2018 @ 2:31 PM |
Frank Andys # is 1-413-768-8487. ken ct.
|
|
kirkstad | -- 03-11-2018 @ 12:55 PM |
Hi Ken Thank You for finding Andy's number for me and your phone call yesterday regarding the 36 parts.If you can perhaps you could include a picture of your 36,would love to see it. Thank's again Frank
|
|
ken ct. | -- 03-11-2018 @ 3:18 PM |
Put 1 in the box off a printer. That was 10 yrs ago ,have had for 25 yrs. Which fuel pump is on yours (small dome 2" diam) or later one is 2 1/4"dome. Small one has a 10x32 hex head slotted screw for a drain hole. Bigger one has a "T" handle drain pet cock ??. ken ct.
|
|
kirkstad | -- 03-12-2018 @ 10:07 AM |
Hi Ken. My pump measures 2 and 1/4 at the dome base. I have the t-handle type drain. Thanks frank
|
|
ken ct. | -- 03-12-2018 @ 1:29 PM |
That bigger one is for late 36 to 40. Its correct if you have a late production 36. The dist would also have a flat topped coil which is for late 36 also. Their are some differences between early and late 36. Call if you need more info. ken ct.
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=11730 |