| JohnA | -- 02-17-2018 @ 9:19 AM |
|
I recently replaced diaphragm on fuel pump and installed on my 239 59a I didn"t even know about those little inlet valves or I would have replaced them to.Carb runs out of fuel,my question is how much fuel should that pump put out in say 30 sec??
|
|
| TomO | -- 02-17-2018 @ 11:28 AM |
|
https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=10805&keywords=fuel%20delivery Tom
|
|
| JohnA | -- 02-17-2018 @ 1:02 PM |
|
Thanks,Tom
|
|
| Drbrown | -- 02-17-2018 @ 3:09 PM |
|
TomO's procedure is accurate. Another idea might be to attach a pressure gauge to the pump outlet. Most forum members seem to recommend a 2 to 3 psi operating range. The stock pump on my '47 59AB reads a steady 3 psi.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=11673 |