| 1937sedandelivery | -- 01-21-2018 @ 9:15 AM |
|
Hello, Not to steal from another similar thread, but thought I would post this separately. Question: are the 37 and 38 Fordor qtr window garnish moulding rubber seals different? Attached are pics of my 37 Fordor moulding. Thanks, Gregg oops.....I uploaded the wrong attachment, don't know how to delete it??? Will post the same thread with correct attachment, sorry. This message was edited by 1937sedandelivery on 1-21-18 @ 9:18 AM
|
|
| trjford8 | -- 01-21-2018 @ 11:45 AM |
|
Here's what may work if no one supplies the correct rubber. Your windows are the tip out type. Measure them and then compare the measurements to the fordor sedans from 35-40. Those seals may work, but may need to be shortened. Also check with Metro Molded products to see if they still carry the quarter window rubber for a 37 Club coupe. They may be a longer also , but the profile may be exactly the same.
|
|
| 1937sedandelivery | -- 01-21-2018 @ 1:38 PM |
|
Super. I will check it out and report back. Longer will be OK, easy to trim and super-glue. Thanks, Gregg
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=11577 |