| ibshane | -- 12-29-2017 @ 7:23 PM |
|
Anyone know if there is a Inline Fuel Filter out there with the inlet and outlet threaded 1/2"-20 UNF.., or the Metric equivalent M14x2.0?
|
|
| supereal | -- 12-31-2017 @ 2:53 PM |
|
Most inline fuel filters have a hose barb on each end. Some electric pumps have a threaded filter connection, but can be adapted with a threaded barb, usually available at a good parts place. This message was edited by supereal on 12-31-17 @ 2:53 PM
|
|
| ken ct. | -- 12-31-2017 @ 3:18 PM |
|
Most barbed fittings you buy at AP stores are pipe thread. Do NOT use as a carb or FP fitting as PT is NOT compatable with straight 1/2X20 thread. End of conversation. ken ct
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=11507 |