33pickup | -- 10-11-2014 @ 12:00 PM |
The rear wheel bearing surface on the housings of my '33 pickup is worn and have some rust. I need to find the correct measurement to see if I can recover the housings.
|
|
alanwoodieman | -- 10-11-2014 @ 4:40 PM |
you can purchase bearing sleeves to have any machine shop install for you-requires machine work. the problem is sourcing decent replacement sleeves-someone will give the cource for the best sleeves-the last ones I used were not the good ones!!
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=7811 |