RayPratoJr | -- 01-01-2024 @ 8:46 AM |
I'm restoring a 51 F1 back to stock specs. What finish did the exhaust hangers come like from the factory. Thanks
|
|
nelsb01 | -- 01-01-2024 @ 9:07 PM |
I have some older exhaust hangers from a Ford dealership and they are stamped metal and unpainted.
|
|
52flthed | -- 01-02-2024 @ 8:32 PM |
I’m not sure what the factory correct finish would be. But when I replaced my entire exhaust system on my 52 f1 , I used a stock stainless steel one, and I had the hangers cerakote-d; to obviously prevent rust and match the SS exhaust system. I used a silver color that was available but I don’t think you could go wrong with black satin either. My guess is they might have been cad-plated, or just gray primer dipped but that’s only an assumption. P.S. and I just noticed on your posted picture, that your oil filler tube should be painted black like the cap, not red. Looks great! This message was edited by 52flthed on 1-2-24 @ 8:40 PM
|
|
RayPratoJr | -- 01-04-2024 @ 6:55 PM |
Thanks for the input. Much appreciated!
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=16848 |