Occaswright | -- 07-04-2022 @ 6:38 AM |
I recently purchased a very nice 1941 Ford pickup that had a few items to be reattached. One of them was the passenger side spare. There were photos of the truck with the spare mounted, so I believe all the necessary pieces are there. It's a little embarrassing, but I can't figure out exactly what goes where to remount the spare. I've searched for step-by-step guidance in Ford manuals or a YouTube video, but have come up empty. Can anyone offer the steps or a short video (like is the plate behind or in front of the tire?) so I can get this back on correctly? Thanks for any help!
|
|
trjford8 | -- 07-04-2022 @ 1:52 PM |
As far as I know the plate is behind the wheel. I would also recommend you post your question on the Fordbarn as many of those on that site have pickups and can help. There is also a Facebook group dedicated strictly to the 40-41 pickup.
|
|
rustedorrotting | -- 07-30-2022 @ 10:17 AM |
I recently had the same problem on my 41 half ton. I modified the original mount and fabricated a new mounting plate. I mounted the wheel to the mount and put it in position and marked where the mount had to go. Then i located and mounted the mount with bolts and hidden nuts. also baby V8 caps and beauty rings This message was edited by rustedorrotting on 7-30-22 @ 10:37 AM
|
|
dpriddy | -- 10-10-2022 @ 6:14 PM |
Still Need details concerning tire mounting? If so, I'll see if I can help with a few pictures.
|
|
Occaswright | -- 01-28-2023 @ 11:39 AM |
Thanks to all for responses. I'm new to this site and didn't realize there was no notification when a reply was made. I did solve the problem with the assistance of a few V-8 Ford experienced friends. Thanks.
|
|
f1ford48 | -- 05-21-2023 @ 8:16 PM |
Original mount and lock
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=15784 |