| Jeepbut | -- 11-08-2020 @ 1:10 PM |
|
1947 V/8 pickup. What is the torque for intake manifold bolts? Thanks.
|
|
| TomO | -- 11-10-2020 @ 7:43 AM |
|
I cannot find a Ford specification for a torque reading on the intake bolts. I use 25 ft.lb. which is the standard for 3/8"-16 grade 2 bolts and have not had any problems with a leaky intake gasket. Tom
|
|
| Jeepbut | -- 11-15-2020 @ 12:23 PM |
|
Thank you so much. I will go with 25 ft lbs. This message was edited by Jeepbut on 11-15-20 @ 12:23 PM
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=14311 |