| sq1954 | -- 04-21-2025 @ 9:42 PM |
|
Working on my New Haven clock with the fuse in the back of the clock. On the back of the fuse holder inside the clock the wire is disconnected. Where does it connect. I can wind the clock and it runs.
|
|
| TomO | -- 04-25-2025 @ 9:05 AM |
|
The wire should be soldered to the electro-magnet coil. Tom
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=16&Topic=17552 |