| JKrieger1976 | -- 07-02-2019 @ 10:55 AM |
|
Does anybody know what size the original hardware screws were for the rear taillights? There are two screws that hold the duolamp rear lenses in, but the ones I have are old and don’t match. Would like to replace them. Appreciate any leads on where y’all got yours
|
|
| trjford8 | -- 07-02-2019 @ 4:57 PM |
|
As I recall those should be 10-32.
|
|
| TomO | -- 07-03-2019 @ 7:49 AM |
|
The parts catalog calls them out as 8-32 x 3/8" oval head nickle plated screws (P/N 29552 S6). I would look for stainless screws. They are closest in look to the available screws, next would be chrome plated screws. Tom
|
|
| efv8CofAAdmin | -- 07-03-2019 @ 8:40 PM |
|
Here is an amazing fact --- find a electrical outlet cover in your house or garage. Remove one of the screws. It is exactly what you will need - same size, diameter, and thread count. Of course, it is not nickel plated. Web Administrator
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=16&Topic=13031 |