Carcheologist | -- 10-13-2021 @ 7:08 AM |
Anyone know of a source for the correct heater switch knob for the factory accessory water heater used on '40 Fords? I have a good working correct Ark-Less switch, but the knob is crazed and in poor shape. Appreciate any feedback.
|
|
TomO | -- 10-13-2021 @ 8:20 AM |
Larry Caplan had some reproduced, he may still have some. He also sells a screw lit and a stripe kit. I don't have his contact information handy. Look in the Roster, he lives in CA. Tom
|
|
Carcheologist | -- 10-14-2021 @ 8:21 AM |
Thanks Tom, I'll check him out.
|
|
Carcheologist | -- 10-14-2021 @ 8:44 AM |
I don't have a copy of the national roster - would you happen to know which California regional group he's with?
|
|
TomO | -- 10-16-2021 @ 8:05 AM |
If you enable private messaging, I will look in my Roster and send you his contact information. Tom
|
|
1940 Tom | -- 10-16-2021 @ 4:31 PM |
Larry's the best! He should be able to solve your heater issue. I got my correct hot water heater knob from him some years ago for my 40. Tom
|
|
Carcheologist | -- 10-16-2021 @ 6:46 PM |
TomO, I just enabled my private messaging (I think!). Appreciate any info on Larry you can provide. Thanks, Mike
|
|
alexthecarguy | -- 10-17-2021 @ 6:28 PM |
It seems like he is really dedicated on fixing classic Ford cars.
|
|
Jacques1960 | -- 10-23-2021 @ 1:22 PM |
I have the switches, NOS, two speed with both heat and defrost; I paid too much for the pair, but will share the pain if you need one
|
|
Carcheologist | -- 10-26-2021 @ 7:07 AM |
Jacques1960, Thanks for your reply. I was able to find a used switch at Hershey, but the knob was in bad shape. I purchased a new reproduction '39 knob from Larry Caplan in California, so I guess I'm in good shape for now. Just in case I change my mind, how much for one? Kind regards, Mike in Texas
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=14&Topic=15212 |