plymboy | -- 05-25-2020 @ 11:59 AM |
I have two thta are close to the same but the outlet hole is slightly higher on one....which would be correct?....and yes both pumps have the wing shut off/ drain valve
|
|
kubes40 | -- 05-25-2020 @ 2:14 PM |
The outlet should be about 3/16" or so lower than the inlet. The top cover should have NO "tabs". In other words, the lip is smooth all the way around. Mike "Kube" Kubarth
|
|
ken ct. | -- 05-25-2020 @ 4:13 PM |
Correct on both counts Mike !! ken ct
|
|
EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=14&Topic=13859 |