| sarahcecelia | -- 09-23-2019 @ 10:07 AM |
|
Thanks to all who helped with replies to my concerns, my 1940 is purring again. Signals seem to wire differently because of the positive ground, and with the new radiator, and the Thermo cure cleanout, just before installing the new one, it runs about (1) needle width past 1/2 on the gauge!!That's where the book says they should run; Right in the middle! (So what's a needle width over!) Next is the Thermo cure in my 1950 Tudor, and new 50/50 anti freeze. That Thermo cure is amazing!!! Regards, Steve Lee
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=14&Topic=13248 |