Posted By |
Discussion Topic:
36 fuel gauge wiring
-- page:
1
2
3
|
|
Hal |
03-19-2015 @ 9:44 AM
|
|
|
Member
Posts: 99
Joined: Oct 2009
|
Guys I have 36 ford fuel gage with 3 terminals. The two top terminals have a small board between them with wires around it?. What is this ? Then theres the bottom ter- minal. Can anyone tell me how there wired? Which wire goes to the sending unit. Where the hot wire's go. etc. I really need help. Thanks a million Hal
|
Don Rogers |
03-19-2015 @ 12:27 PM
|
|
|
Senior
Posts: 504
Joined: Oct 2009
|
Hal, The enclosed picture should help.
|
Hal |
03-19-2015 @ 1:23 PM
|
|
|
Member
Posts: 99
Joined: Oct 2009
|
Hey Don, Thanks for your answer, but your gage does'nt resembel mine. Mine is single only for fuel,no oil. Thanks for your info. I really appreciated it. Thank's again. Hal
|
Don Rogers |
03-19-2015 @ 3:05 PM
|
|
|
Senior
Posts: 504
Joined: Oct 2009
|
Hal, Can you take a picture of the gauge..front and back??
|
Hal |
03-20-2015 @ 9:18 AM
|
|
|
Member
Posts: 99
Joined: Oct 2009
|
Thanks DON, I haven't got the know to do this, but if you hold on a bit, Ill have my son do this this evening. Hang tight. Hal
|
Hal |
03-20-2015 @ 2:54 PM
|
|
|
Member
Posts: 99
Joined: Oct 2009
|
Don, Here's the pictures of my '36 Ford fuel guage.
|
Hal |
03-20-2015 @ 2:56 PM
|
|
|
Member
Posts: 99
Joined: Oct 2009
|
Don, Here's the back
|
Hal |
03-20-2015 @ 2:58 PM
|
|
|
Member
Posts: 99
Joined: Oct 2009
|
One more of the back
|
Don Rogers |
03-20-2015 @ 3:29 PM
|
|
|
Senior
Posts: 504
Joined: Oct 2009
|
It looks like the gauge has been adapted for 12volts? A standard 6 volt gauge only has 2 terminals. Are you running a 6 or 12 volt system?
|
Don Rogers |
03-20-2015 @ 5:05 PM
|
|
|
Senior
Posts: 504
Joined: Oct 2009
|
It looks like the gauge has been adapted for 12volts? A standard 6 volt gauge only has 2 terminals. Are you running a 6 or 12 volt system?
|