| 1937sedandelivery | -- 03-26-2015 @ 1:25 PM |
|
Hello, Does anyone have a clear photo they could send of the rear tray area of a 37 Sedan Delivery? Just dropped my car off to have all the body work done and my rear tray area is completely trashed and bondo-ed over. Want to have it restored to stock condition. Also, if you know where I can purchase a replacement panel for this area that would be a huge help. I tried the usual companies (Mac's, etc.) and they didn't have anything. The attached picture shows the areas of interest (in red and yellow). Thanks a bunch, gregg
|
|
| trjford8 | -- 03-26-2015 @ 5:13 PM |
|
Did you try EMS? They make all kinds of patch panels. www.emsautomotive.com This message was edited by trjford8 on 3-26-15 @ 5:16 PM
|
|
| 1937sedandelivery | -- 03-26-2015 @ 8:20 PM |
|
No, I didn't, will call them tomorrow. Thanks.
|
|
| 1937sedandelivery | -- 03-27-2015 @ 9:01 AM |
|
I called EMS. They were helpful and knowledgeable but did not have the exterior piece. They do have the inner piece though.
|
|
| juergen | -- 03-27-2015 @ 12:17 PM |
|
Here are some pictures of the rear of my 37 Sedan Delivery
|
|
| juergen | -- 03-27-2015 @ 12:18 PM |
|
another shot
|
|
| juergen | -- 03-27-2015 @ 12:18 PM |
|
Final shot
|
|
| 1937sedandelivery | -- 03-27-2015 @ 1:16 PM |
|
Perfect, thanks for your continued help. I see that indeed there are vertical seams on the sides, something most "customized" cars have filled in.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=18&Topic=8355 |