| rawlir | -- 07-07-2014 @ 7:26 AM |
|
Good morning, all! Does anyone know if there was more than two front fender sizes for 46&47 Ford trucks (non cabovers) I know there was a size for front fenders of Commercials (1/2 ton models)....I am wondering if the front fenders for the Express (Tonners) and the Heavy Duty models are the same size. I know there is a 21T part number size, is it for ALL trucks bigger than the 1/2 ton models? THANK YOU! Rick
|
|
| cliftford | -- 07-07-2014 @ 9:24 AM |
|
If I remember correctly, the 1 1/2 models haad larger front wheel openings than the 1/2 and 3/4 ton models. Sorry, I do not have access to a parts manual for this.
|
|
| 49fordv8f4 | -- 07-07-2014 @ 3:56 PM |
|
Rick, the tonner fenders are the same as the 1 1/2 and 2 ton trucks. As far as I know there were only two different fenders, the 1/2 ton (21C) and the truck (21T), with the wheel opening size being the only difference between them. Mark
|
|
| rawlir | -- 07-08-2014 @ 3:12 PM |
|
Thank you both for the reply! Is there any way you can think of to ID a fender (like if you found one at a swap meet) to determine 21C or 21T?
|
|
| cliftford | -- 07-08-2014 @ 8:16 PM |
|
Try to find a good picture of each style of fender, maybe on ebay, or find a truck like yours and take measurements of the fender opening and pictures.
|
|
| garyhenrich | -- 07-25-2014 @ 9:54 AM |
|
Do the 41's also have different front fenders between the 1/2 ton and the truck with duals?
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=7487 |