| Mac88 | -- 09-20-2016 @ 3:03 PM |
|
I have a 1935 Ford Pickup and I am trying to install new window channels from Bob Drake(channels w/rubber bumpers). I don't have instructions and I am looking for a diagram or instructions on the process. The kit came with 2 pieces of 13" +/- channel, 2 pieces of 38" +/- channel, 2 straight pieces of metal channel and 2 pieces of shorter metal channel that is curved on the end. Any help or advice would be appreciated. thanks
|
|
| carcrazy | -- 09-20-2016 @ 11:01 PM |
|
You might want to look at this website for some answers to your questions: http://www.35pickup.com/Window.html
|
|
| alanwoodieman | -- 09-22-2016 @ 2:52 PM |
|
call drake and get an instruction sheet
|
|
| Mac88 | -- 09-23-2016 @ 12:08 PM |
|
Thanks I checked this out. It is very helpful explaining the installation of door glass but doesn't go into window channels.
|
|
| Mac88 | -- 09-23-2016 @ 12:09 PM |
|
I called Drake and they have nothing for me!
|
|
| TomO | -- 09-24-2016 @ 6:57 AM |
|
Try contacting the V-8 Club's 1935 Adviser. His contact information is in the V-8 Times. Tom
|
|
| 42oink | -- 09-28-2016 @ 8:06 AM |
|
Greetings, Dennis Carpenter had a picture step-by-step instruction in the back of one of his catalogs a while back. it was on a pick-up and pretty well done. If someone could post it to you (I can't, sorry) I believe it would help you. 42oink.
|
|
| EFV-8 Club Forum : | https://www.earlyfordv8.org/forum |
| Topic: | https://www.earlyfordv8.org/forum/viewmessages.cfm?Forum=17&Topic=10094 |